| Charge Part | KE014 | 02M/02A180 | 03M/03A180 | 04M/04A180 | 05M/05A180 |
| Rated input voltage | 220-240Vac 50Hz /60Hz |
| Rated input current | 0.06A Max. @230Vac |
| Input inrush current | 30A(twidth=100uS 50% Ipek@230Vac(Cold start at full load ) |
| Power factor | ≥0.5@230Vac |
| Input power | <4W |
| Battery charging current (Max) | 350mA |
| Battery charging time | 24 hours Max |
| Emergency Part | Operating mode | Emergency mode |
| Load type | LED |
| Emergency power | 2W | 3W | 4W | 5W |
| Emergency time | 3hours |
| Load output current | 100-30mA | 130-45mA | 200-65mA | 230-80mA |
| Load output voltage | 20-60VDC |
| Battery | LifePO4 (The battery capacity meets the emergency time at 25℃) | 6.4V 1.6Ah | 6.4V 3.6Ah |
| Battery warranty | Warranty 3 years, Design Life 5 years. |
| Exception Driver Requirements | Surge current | N/A |
| Input current | N/A |
| Output current | 2 A Max. |
| Emergency Function Test | Charging | Greenlight |
| Fault | Green light off |
| Manual test | Yes |
| Auto Testing | Autotest KE014- | 02A180HE/03A180HE/04A180HE/05A180HE |
| Fault/test / Status | Reason | Charge Indicator Status |
| Battery fully charged and operational | Standard daily use | solid green |
| |
| Battery Charging | Initial Charge/Battery Top Up | solid green |
| |
| Auto Test 3 Hours (every 12 months) | Periodic self-test | Flashing Green 3 sec on 1 sec off |
| |
| Auto Test 5 Min (every 30 days) | Periodic self-test | Flashing Green 3 sec on 3 sec off |
| |
| Duration test fault | Failed the 3-hour annual test | Flashing Red 0.5 sec on 0.5 sec off |
| |
| LED fault | Not plugged in or damaged/faulty | Flashing Red 2 sec on – 2 sec off |
| |
| Battery Disconnected/Faulty | Not plugged in or damaged/faulty | solid red |
| |
| Emergency protection | Battery over-charge/deep discharge protection | Yes |
| Output over-voltage protection | Yes |
| Output overload protection | Yes |
| Output short circuit protection | Yes |
| Operating Environment | Operating temperature/humidity | 0℃…+50℃ Humidity:20%-75%(without condensation) |
| Storage temperature/humidity | -5℃-35℃ |
| Case Max. Temp(Tc) | 75℃ |
| Safety & EMC | Withstand voltage | 3000Vac 5mA 60S (Input “L N” – output “SEC+ SEC-) |
| Safety standard | EN61347-1, EN61347-2-7 |
| EMC standard | EN55015, EN61000-3-2, EN61000-3-3 |
| Battery standard | UN38.3 |
| Environmental protection requirements | Compliant to RoHS |
| Certification | CE |
| Others | Input/output(terminal/wiring) specification | Press terminal, wire diameter:0.5-0.75mm2 |
| IP rating | IP20 |
| Type of protection | Class 2 |
| Installation type | Built-in installation |
| Installation dimension | 146*30*22.5mm |
| Others | Packaging requirement | White box+Instruction manual+clapboard+outer carton(K=A) |
| Weight : Emergency Power Supply | 75g |
| Lifespan | 5 Year @Ta ( Battery not included ) |
| Notes: All parameters are tested on the input voltage 230Vac, environment temperature 25℃ unless otherwise specified. |
